Software Downloads



Enertech Home Page | EMFW Main Page | Module Information | FAQ's
Ordering | Newsletter | Technical Support | Project Managers


Several items of interest pertaining to the EMFWorkstation can be downloaded from this site. The items are broken into areas such as brochures, documentation & white papers, module examples, EMFWorkstation software, and patches/updates. All files are self extracting zip files unless otherwise noted. Place the file in the desired directory and execute it to extract its information. See download instructions if more information is desired.

Select the desired link to download the corresponding item. Downloaded files can be either:

         Acrobat PDF Files
 
         InstallShield Self-extracting and Running Setup Files
 
   or  WinZip Self-extracting Files

 

Download Area

           
Documentation & White Papers (PDF format)
       White Paper on EMFWorkstation 2.5 (317Kb)
 
       White Paper on RESICALC 2.0 (221Kb)
 
           
Adobe Acrobat Reader
      You will need to obtain a copy of Adobe Acrobat Reader if you wish to view the documentation that accompanies the examples below or the EMFW Newsletter. You can obtain a copy of Adobe's Acrobat Reader from Adobe's web site.
      Download Instructions
           
Module Examples

         

RESICALC

     
       File showing Transmission Line Mitigation (563Kb)
 
 File showing a Typical School (164Kb)

          SUBCALC

     
       File showing Substation Mitigation (93Kb)
 
 File showing a Typical Vault (106Kb)
 
      Note: Most examples contain .pdf files explaining their contents.
      Download Instructions
           
EMFWorkstation Software
      Unregistered Version of EMFWorkstation 2.51 -
The unregistered version of the software will allow the user to access many of the features of the EMFWorkstation modules except for performing calculations or saving files. To use all features, the software must be purchased (contact ETCSales)..
 
      The EMFWorkstation and its modules are a Microsoft Windows application and will only run under Windows 3.1 or higher.
 

      Minimum System requirements for EMFWorkstation are:
  • D486 system or better
  • Windows 3.1 or higher
  • 4 Mb of RAM
  • 18 Mb of free disk space
  • VGA Monitor and adapter
  • Mouse
     
The Software is now available in modules.  Now you can select the desired module
to download and test some of its features before purchasing. Descriptions for
each module can be found under Module Information.
 
  Conductor Database (1.70 Mb)
 
  ENVIRO (1.97 Mb)
 
  EXPOCALC (2.24 Mb)
 
  Power Line Calculator (1.72 Mb)
 
  RESICALC (3.85 Mb)
 
  SUBCALC (3.61 Mb)
 
Download Instructions
           
EMFWorkstation Patches/Updates
        Update for EMFWorkstation v2.5 to v2.51 (2.98 Mb)
 
Update for ENVIRO v3.5x to v3.52 (215 Kb) Installation Instructions
      Please be sure to closely follow the setup instructions.
      Download Instructions  

 

EMCALC 95 rev D (free Y2K compliant upgrade for all EMCALC users)

Even though this is a Windows install, EMCALC 95d is still a DOS application.  It is still subject to the same memory limitations that it's always had when running under Windows.  This Windows installation file was created for those clients who were having difficulty installing EMCALC 95 under Windows 3.1, 95 and NT because of limitations of the DOS install utility.    This Windows installation has been tested under Windows 3.1, Windows 95 and Windows NT 4.0 successfully.
Important! You will need to enter the password "tatoonie" when running the installation program.

       
EMCALC 95d Windows installation file (4.2 Mb)

 

     You may want to check the Fequently Asked Questions before downloading EMCALC 95d
 

EMCALC 2000 patch 1.0.0.3 

     

 

EMCALC 2000 patch file (780 Kb)

      Please be sure to closely follow the setup instructions.

Download Instructions  

 

EMF Modeler patch 1.0.0.4 

EMF Modeler patch file (1.2 Mb)